How To Turn On Load And Go Whirlpool

The "Load & Go" feature on Whirlpool washing machines is designed for convenient dispensing of laundry detergent and fabric softener. This system allows you to fill the dispenser less frequently, as it automatically releases the correct amount of product based on the wash cycle settings. Here is a step-by-step guide on how to effectively utilize the Load & Go function.

Filling the Load & Go Dispenser

The initial step involves filling the Load & Go dispenser with the appropriate laundry products. This is the foundation for the automated dispensing system to function correctly.

Locate the Dispenser Drawer

Begin by identifying the location of the dispenser drawer on your Whirlpool washing machine. Typically, this drawer is situated on the top panel of the machine, often on the left-hand side. It is usually clearly marked with symbols indicating the compartments for detergent, fabric softener, and bleach (if applicable).

Refer to your washing machine’s user manual if you are unsure about the location of the dispenser drawer.

Open the Dispenser Drawer

Once located, gently pull the dispenser drawer open. It should slide out smoothly. If it feels stuck, do not force it, as this could damage the drawer mechanism. Ensure nothing is obstructing the drawer's path.

Identify the Load & Go Compartment

Within the dispenser drawer, locate the Load & Go compartment. This is usually a larger, dedicated reservoir specifically designed for liquid laundry detergent. It may be labeled with “Load & Go” or a similar identifier. It is often a larger reservoir compared to the single-dose compartments.

Fill with Liquid Detergent

Carefully pour liquid laundry detergent into the Load & Go compartment. Important: Only use high-efficiency (HE) detergent designed for use in high-efficiency washing machines. Using regular detergent can create excessive suds, which can negatively impact the machine's performance and potentially cause damage.

Example: Tide HE Turbo Clean is a suitable detergent for Load & Go dispensers.

Fill the compartment up to the maximum fill line, which is typically indicated by a mark or label inside the compartment. Avoid overfilling, as this could lead to detergent leakage or improper dispensing. Overfilling can also interfere with the proper functioning of the dispenser mechanism.

Fill Fabric Softener Compartment (Optional)

If you wish to use fabric softener, locate the designated fabric softener compartment within the dispenser drawer. This is usually a smaller compartment separate from the Load & Go detergent reservoir. Pour the fabric softener into this compartment, again being careful not to overfill. Many fabric softener compartments have a siphon cap; ensure you follow the instructions in your user manual for its proper usage.

Example: Snuggle SuperCare liquid fabric softener is compatible with most washing machines.

Close the Dispenser Drawer

After filling the necessary compartments, carefully slide the dispenser drawer closed until it clicks into place. Ensure that the drawer is fully closed and secure before starting a wash cycle.

Activating Load & Go Functionality

Now that the dispenser is filled, learn how to activate the Load & Go functionality during the wash cycle selection process.

Power On the Washing Machine

First, turn on your Whirlpool washing machine by pressing the power button. The control panel should illuminate, allowing you to select your desired wash cycle and settings.

Select Wash Cycle

Choose the appropriate wash cycle for your load of laundry. This might include options like "Normal," "Delicates," "Heavy Duty," or "Quick Wash." Consult your washing machine’s user manual for recommendations on which cycle is best suited for different types of fabrics and soil levels.

Adjust Wash Settings (Optional)

Depending on your model, you may be able to adjust settings such as water temperature, spin speed, and soil level. These settings can be customized to further optimize the wash cycle for your specific needs.

Enable Load & Go

This is a crucial step. On many Whirlpool models, the Load & Go feature is automatically enabled when detergent is detected in the reservoir. However, some models may require you to manually select the Load & Go option on the control panel. Look for a button or setting labeled “Load & Go,” “Automatic Dispensing,” or something similar. Press the button or select the setting to activate the feature.

If your model requires manual activation, verify that the Load & Go indicator light is illuminated on the control panel. This confirms that the automatic dispensing system is engaged.

Start the Wash Cycle

Once you have selected the wash cycle, adjusted the settings, and enabled the Load & Go feature, press the start button to begin the wash cycle. The washing machine will automatically dispense the appropriate amount of detergent and fabric softener (if applicable) at the correct times during the cycle.

Troubleshooting Load & Go

Here are a few troubleshooting tips should you encounter problems.

Detergent Not Dispensing

If the detergent is not dispensing correctly, first ensure that the Load & Go compartment is properly filled. If the compartment is empty, refill it with HE detergent. Also, check to see if the Load & Go feature is activated (if required) on the control panel.

If the problem persists, consult your washing machine’s user manual for specific troubleshooting steps or contact Whirlpool customer support.

Excessive Suds

Excessive suds typically indicate that you are using regular detergent instead of HE detergent. Stop using the regular detergent and switch to HE detergent immediately. Run an empty wash cycle to help clear out any remaining suds.

Leaking Detergent

If you notice detergent leaking from the dispenser drawer, ensure that you are not overfilling the Load & Go compartment or the fabric softener compartment. Overfilling is a common cause of leaks. Also, check to see if the dispenser drawer is properly closed and secure. Clean the dispenser drawer regularly to prevent buildup, which can also cause leaks.

Maintaining the Load & Go System

Regular maintenance is key to ensuring optimal performance of the Load & Go system. Here are some maintenance tips:

Regular Cleaning

Periodically clean the dispenser drawer and the Load & Go compartment to prevent detergent buildup. This will ensure proper dispensing and prevent clogs. You can typically remove the dispenser drawer completely for easier cleaning. Rinse all parts thoroughly with warm water and allow them to dry completely before reassembling.

Use HE Detergent

As mentioned earlier, always use HE detergent in the Load & Go system. This is crucial for preventing excessive suds and ensuring optimal performance. Refer to the detergent manufacturer's instructions for the appropriate amount to use.

Avoid Overfilling

Avoid overfilling the Load & Go compartment and the fabric softener compartment. Overfilling can lead to leaks and improper dispensing.

Check Dispenser Regularly

Periodically check the dispenser to ensure that it is functioning correctly. Look for any signs of clogs, leaks, or other problems. Address any issues promptly to prevent further damage or performance issues.

By following these steps and tips, you can effectively use the Load & Go feature on your Whirlpool washing machine for convenient and efficient laundry dispensing. This feature simplifies the laundry process and helps to ensure that you are using the correct amount of detergent for each wash cycle. Remember to consult your washing machine’s user manual for specific instructions and troubleshooting tips related to your model.