How To Install A Franklin Binary Trigger

Alright, friend, so you're thinking about installing a Franklin Armory Binary Trigger? Sweet! Get ready for some double-tap fun (at the range, of course – safety first, always!). Now, I know it can seem a little intimidating at first, but trust me, with a little patience and the right guidance, you'll be slapping those targets like a pro in no time. Think of it as adult LEGOs… but way cooler and with more bang.

Disclaimer Time! Before we dive in, remember I’m just a friendly internet pal, not a certified gunsmith. Always follow the manufacturer's instructions (Franklin Armory's manual is your bible here!) and if you’re at all uncomfortable, take it to a professional. Seriously. It’s better to spend a few bucks than accidentally turn your AR into a paperweight (or worse!). Safety goggles on, okay?

What You'll Need (Besides Courage)

First, let's gather our tools. This isn’t brain surgery, but you'll need a few essentials:

• Your shiny new Franklin Armory Binary Trigger. (Duh!)
• A hammer. (Not the MC. Though his music does get you pumped.)
• A set of punches. (Roll pin punches are your best friends here.)
• A roll of tape. (Protect that lower receiver from clumsy mistakes!)
• A vise block. (To hold your lower receiver securely.)
• Some gun oil or grease. (For smooth operation.)
• And a clear, well-lit workspace. (Seriously, don't try this in a dimly lit dungeon.)

Got all that? Excellent! Let’s proceed. Make sure your firearm is unloaded and safe. Double-check. Triple-check. Seriously, no exceptions. Pretend you’re diffusing a bomb in a Hollywood movie. (Except hopefully less sweaty.)

Disassembly: Out with the Old

Okay, so the first step is removing your old trigger. Most AR-15 triggers are pretty standard, but here's the basic rundown:

1. Remove the magazine. (Again, triple-check it's empty!)
2. Push out the rear takedown pin and separate the upper and lower receivers.
3. Punch out the hammer pin and remove the hammer. (Might need a little tap-tap-tapperoo.)
4. Punch out the trigger pin and remove the trigger.
5. Remove the safety selector. (Usually, you can rotate it to a certain position and pull it out.)
6. Remove the disconnector. (It’s that little guy that sits behind the trigger.)

Keep all these parts organized! A little container is your friend. Don't want to lose a spring under the couch and discover it a year later when your cat tries to eat it.

Installation: In with the New!

Now for the fun part! Installing the Franklin Armory Binary Trigger is generally a straightforward process, but pay close attention to the instructions. Each model might have slight variations.

1. Install the new trigger. Slide the trigger into place and insert the trigger pin. Make sure it’s centered!
2. Install the hammer. Place the hammer in its slot and insert the hammer pin. Again, a little tap-tap-tapperoo might be needed.
3. Install the disconnector. The Franklin Armory trigger usually has its own disconnector setup. Follow the instructions precisely here. This is a crucial part for proper function!
4. Install the safety selector. Make sure it moves smoothly between positions.

Important! Function check time! With the upper receiver still separated, manually cycle the hammer and trigger. Make sure the disconnector is catching the hammer correctly in both semi-auto and binary modes (if applicable). The safety selector should also function properly. If something feels off, stop and consult the manual or a professional. Don't force anything!

Reassembly and Final Checks

Reattach the upper and lower receivers. Perform a full function check with dummy rounds (or snap caps). This means: racking the charging handle, dry-firing in both semi-auto and binary modes (if applicable), and testing the safety selector.

Final Thoughts: If everything seems to be working smoothly, congratulations! You've successfully installed your Franklin Armory Binary Trigger! Remember to always practice safe gun handling and familiarize yourself with the trigger's operation at the range before you start blasting away. Start slow and get comfortable with the new trigger pull.

But if at any point during this process, something feels wrong, don't hesitate to seek professional help from a qualified gunsmith. It's always better to be safe than sorry!

Now go forth and enjoy your new binary trigger! Just remember to be responsible, safe, and have a blast (literally!). You’ve earned it! And hey, maybe send me a picture of your targets later, so I can admire your newfound accuracy (or lack thereof – we all start somewhere!). Happy shooting!