Changing the battery in your MVMT watch might seem daunting, but it's a practical skill that can save you money and time. Instead of heading to a jeweler every time your watch dies, you can learn to do it yourself. This guide provides the steps and tips you need.
Gathering Your Tools and Materials
Before you begin, make sure you have everything on hand. You'll need:
A new watch battery. Check your MVMT watch's model number to determine the correct battery size. Common sizes are SR626SW or SR621SW.
A watch case opener. This could be a case knife (a small, thin blade) or a case back removal tool (a two-pronged tool for screw-on backs).
A small screwdriver set. You'll need a very small flathead screwdriver for levering out the battery.
Tweezers. Plastic tweezers are preferable to avoid scratching the watch components.
A soft cloth or microfiber cloth. This will protect the watch face and case from scratches.
A small container or tray. This is to hold the screws and small parts to prevent them from getting lost.
Magnifying glass (optional). Helpful for seeing small details.
Opening the Watch Case
MVMT watches typically have one of two types of case backs: snap-on or screw-on. Identify which type you have before proceeding.
These backs have a small lip that you can pry open.
Protect the watch face: Place the watch face down on the soft cloth.
Locate the notch: Examine the edge of the case back for a small notch or indentation. This is where you'll insert the case knife.
Insert the case knife: Carefully insert the tip of the case knife into the notch. Gently rock the knife back and forth to pry the case back open. Avoid using excessive force. The back should pop open with a little pressure.
Work around the edge: Once you've created a small opening, carefully slide the knife around the perimeter of the case back to fully detach it.
Important: Be careful not to scratch the case or the case back. Work slowly and deliberately.
Screw-On Case Backs
These backs have small grooves or notches that allow you to unscrew them.
How To Change Battery MOVADO Watch, Easy To Replace - YouTube
Protect the watch face: Place the watch face down on the soft cloth.
Use the case back removal tool: Position the two prongs of the case back removal tool into the corresponding notches on the case back.
Unscrew the back: Gently turn the tool counterclockwise to loosen the case back.
Remove the back: Once the back is loose, unscrew it completely by hand.
Important: Make sure the prongs of the tool are securely seated in the notches to avoid slipping and scratching the case back.
Removing the Old Battery
Locate the battery: Once the case back is removed, you'll see the battery. It's usually held in place by a small metal clip or bracket.
Remove the retaining clip: Use the small screwdriver or tweezers to gently pry or slide the retaining clip away from the battery. Be careful not to bend or break the clip. Some clips are screwed in, so you'll need the appropriate screwdriver.
Remove the battery: Use the plastic tweezers to carefully lift the old battery out of the compartment. Avoid touching the battery with your fingers.
Important: Note the orientation of the battery before removing it. The positive (+) side and negative (-) side are usually marked on the battery and the watch movement.
Inserting the New Battery
Insert the new battery: Using the plastic tweezers, carefully place the new battery into the compartment with the correct orientation (positive (+) side up or down, as indicated).
Secure the retaining clip: Use the small screwdriver or tweezers to reattach the retaining clip, ensuring the battery is securely held in place.
Important: Make sure the battery is properly seated and the retaining clip is securely fastened. A loose battery can cause the watch to malfunction.
MVMT Watch Battery Replacement - YouTube
Replacing the Case Back
Now it's time to put the watch back together.
Snap-On Case Backs
Align the case back: Carefully align the case back with the watch case, ensuring the markings on the back (if any) are correctly positioned.
Press the case back into place: Press firmly around the perimeter of the case back until it snaps securely into place. You should hear a click.
Ensure a tight seal: Check that the case back is flush with the case and that there are no gaps.
Screw-On Case Backs
Align the case back: Carefully align the case back with the watch case.
Screw the back into place: Gently screw the case back on by hand until it's snug.
Tighten with the tool: Use the case back removal tool to tighten the case back. Avoid overtightening.
Important: Ensure the case back is properly sealed to protect the watch movement from dust and moisture.
Testing Your Work
After replacing the case back, check to see if the watch is running. If the second hand is moving, you've successfully replaced the battery. If not, double-check that the battery is correctly installed and that the retaining clip is secure. You may also want to check the battery voltage with a multimeter (if you have one) to ensure the battery is new and functional.
MVMT Watch Review! - YouTube
Practical Applications in Daily Life and Work
Knowing how to change your MVMT watch battery has several benefits:
Cost Savings: You'll save money by avoiding trips to a jeweler or watch repair shop. These services can be expensive for a simple battery replacement.
Time Savings: You won't have to wait for someone else to replace the battery. You can do it yourself in a few minutes.
Convenience: You can replace the battery at your convenience, without having to schedule an appointment or drop off your watch.
Self-Reliance: You'll gain a valuable skill that can be applied to other battery-operated devices.
Emergency Preparedness: If your watch battery dies unexpectedly (for example, during travel or a work deadline), you can quickly replace it yourself.
For professionals who rely on accurate timekeeping (such as nurses, pilots, or project managers), the ability to quickly and reliably change a watch battery is especially valuable. It minimizes downtime and ensures they can stay on schedule.
Checklist/Guideline: Changing Your MVMT Watch Battery
Before you start:
Are MVMT Watches Finally Worth Buying? - YouTube
Gather all necessary tools and materials.
Identify the type of case back (snap-on or screw-on).
Protect the watch face with a soft cloth.
During the process:
Work slowly and carefully to avoid scratching or damaging the watch.
Note the orientation of the old battery before removing it.
Use plastic tweezers to handle the battery.
Ensure the new battery is securely held in place by the retaining clip.
