Everstart Jump Starter How To Charge

Owning an Everstart jump starter can be a lifesaver, but its effectiveness hinges on keeping it properly charged. Neglecting this can leave you stranded when you need it most. Knowing how to charge it correctly is crucial for its reliability and longevity. This article provides practical guidance on how to charge your Everstart jump starter using different methods, ensuring it's always ready to jumpstart your vehicle.

Charging with a Wall Charger

The most common way to charge an Everstart jump starter is with the AC wall charger included in the package. This method is straightforward and convenient for home use.

Step-by-Step Instructions

1. Locate the charging port on your Everstart jump starter. It's usually a small, round port covered by a protective rubber flap to keep out dust and moisture.
2. Remove the protective flap covering the charging port.
3. Insert the AC wall charger plug into the charging port. Ensure it fits snugly. Do not force the plug if it doesn't fit easily; check that you are using the correct charger.
4. Plug the other end of the AC wall charger into a standard household outlet (120V).
5. Observe the charging indicator lights on the jump starter. These lights usually illuminate to show the charging progress. The specific pattern of lights may vary depending on the Everstart model, so consult your owner's manual for details. Typically, a flashing light indicates charging, and a solid light indicates a full charge.
6. Allow the jump starter to charge fully. Charging times vary, but it usually takes between 24 to 48 hours to reach a full charge from a completely depleted battery. It’s best to refer to your owner’s manual for the recommended charging time for your specific model.
7. Once the charging indicator lights indicate a full charge, unplug the AC wall charger from both the jump starter and the wall outlet.
8. Replace the protective flap over the charging port to prevent dust and moisture from entering.

Important Note: Avoid overcharging the jump starter. Once fully charged, unplug it to prevent potential damage to the battery. Overcharging can reduce the battery's lifespan and performance.

Charging with a DC Car Charger

For charging on the go, a DC car charger (also known as a cigarette lighter adapter) offers a convenient solution. This is particularly useful when you're traveling or don't have access to a wall outlet.

Step-by-Step Instructions

1. Locate the charging port on your Everstart jump starter. As with wall charging, it's usually a small, round port covered by a protective rubber flap.
2. Remove the protective flap covering the charging port.
3. Insert the DC car charger plug into the charging port of the jump starter.
4. Plug the other end of the DC car charger into the cigarette lighter socket (12V DC outlet) in your vehicle.
5. Turn on your vehicle’s engine. This provides power to the cigarette lighter socket and allows the jump starter to charge. Charging without the engine running may drain your vehicle's battery.
6. Observe the charging indicator lights on the jump starter. They will illuminate to show the charging progress, similar to when using the AC wall charger.
7. Allow the jump starter to charge for the recommended time. Charging times with a DC car charger may be longer than with a wall charger. Consult your owner's manual for specific charging times.
8. Once the charging indicator lights indicate a full charge, unplug the DC car charger from both the jump starter and the cigarette lighter socket.
9. Turn off your vehicle’s engine.
10. Replace the protective flap over the charging port on the jump starter.

Caution: Do not leave the jump starter charging unattended in your vehicle for extended periods. It's best to monitor the charging progress and disconnect it once it's fully charged.

Maintaining Your Everstart Jump Starter's Battery

Proper maintenance is key to extending the life of your Everstart jump starter. Here are some helpful tips:

• Regular Charging: Even if you don't use the jump starter frequently, charge it every 3-6 months to maintain the battery's health. Lead-acid batteries, commonly used in jump starters, can self-discharge over time.
• Storage: Store the jump starter in a cool, dry place. Avoid extreme temperatures, as they can damage the battery.
• Avoid Deep Discharges: Try to avoid completely draining the battery. Recharge it as soon as possible after use.
• Check the Battery Terminals: Periodically inspect the battery terminals for corrosion. If you notice any corrosion, clean it with a wire brush and apply a battery terminal protector spray.
• Read the Owner’s Manual: The owner's manual contains specific instructions and recommendations for your Everstart jump starter model. Refer to it for detailed information on charging, maintenance, and safety precautions.

By following these maintenance tips, you can ensure that your Everstart jump starter remains in optimal condition and is ready to use when you need it most.

Troubleshooting Charging Issues

If your Everstart jump starter isn't charging properly, here are some common issues and potential solutions:

• No Indicator Lights: If no indicator lights illuminate when you plug in the charger, check the following:
  • Ensure the charger is properly plugged into both the jump starter and the power outlet.
  • Verify that the power outlet is working.
  • Inspect the charger cord for any damage.
  • Check the fuse in the jump starter (if applicable).
• Slow Charging: If the jump starter is charging very slowly, it could be due to:
  • A weak or damaged battery.
  • A faulty charger.
  • Low ambient temperature. Cold temperatures can slow down the charging process.
• Jump Starter Won't Hold a Charge: This could indicate a degraded battery. Contact Everstart support or a qualified technician for battery replacement options.

If you've tried these troubleshooting steps and your jump starter still isn't charging, it may require professional service or battery replacement. Always refer to the owner's manual for specific troubleshooting guidance for your model.

Practical Applications in Daily Life

Knowing how to properly charge your Everstart jump starter directly translates to practical benefits in your daily life and work:

• Peace of Mind: Knowing your jump starter is fully charged provides peace of mind, especially during emergencies or when traveling to remote areas.
• Reduced Stranded Situations: A fully charged jump starter significantly reduces the risk of being stranded with a dead battery.
• Cost Savings: Avoiding the need for roadside assistance or towing services can save you money in the long run.
• Time Efficiency: Jumpstarting your vehicle yourself saves time compared to waiting for assistance.
• Increased Self-Reliance: You become more self-reliant and capable of handling unexpected vehicle issues.
• Professional Applications: For professionals who rely on their vehicles for work (e.g., delivery drivers, contractors), a reliable jump starter can minimize downtime and disruptions to their business. Regularly charging the jump starter becomes part of the daily or weekly routine to maintain operational efficiency.

Example Scenario: Imagine you're a real estate agent showing properties to clients. A dead battery can cause significant delays and inconvenience, potentially losing you a sale. A fully charged Everstart jump starter allows you to quickly resolve the issue and continue your appointments without interruption. Similarly, a construction worker on a remote job site needs to ensure his truck starts every morning; having a charged jump starter on hand prevents costly delays and ensures work can continue on schedule.

Everstart Jump Starter Charging Checklist

Use this checklist as a quick reference guide for charging your Everstart jump starter:

1. Locate the Charging Port: Find the charging port on your jump starter.
2. Select Charging Method: Choose either AC wall charger or DC car charger.
3. Connect the Charger: Plug the charger into the jump starter and the power source (wall outlet or vehicle's cigarette lighter socket).
4. Monitor Indicator Lights: Observe the charging indicator lights to track progress.
5. Charge Fully: Allow the jump starter to charge fully according to the owner's manual recommendations.
6. Unplug the Charger: Disconnect the charger once fully charged to prevent overcharging.
7. Replace Protective Flap: Cover the charging port with the protective flap.
8. Regular Maintenance: Charge the jump starter every 3-6 months, even when not in use.