2017 Infiniti Q60 Flat Tire Reset

The 2017 Infiniti Q60, like many modern vehicles, is equipped with a Tire Pressure Monitoring System (TPMS). This system alerts the driver when one or more tires are significantly under-inflated. After correcting a flat tire or adjusting tire pressures, it's often necessary to reset the TPMS to ensure accurate readings and avoid unnecessary warnings. This article provides a comprehensive guide on how to perform a TPMS reset on a 2017 Infiniti Q60.

Understanding the TPMS

Before proceeding with the reset procedure, it's crucial to understand the basics of the TPMS. The system relies on sensors located inside each tire, which measure tire pressure and transmit this data wirelessly to the vehicle's computer. When a tire's pressure falls below a pre-determined threshold, the TPMS warning light illuminates on the dashboard.

After addressing the low tire pressure (e.g., inflating the tire or replacing it after a flat), the TPMS may not immediately recognize the change. This is because the system needs to recalibrate and relearn the tire pressure sensor IDs. The reset procedure forces the system to do this, clearing the warning light and ensuring accurate future readings.

Methods for TPMS Reset

Several methods can be employed to reset the TPMS on a 2017 Infiniti Q60. These methods vary in complexity and required tools. The following sections detail the most common and effective approaches.

Method 1: The Driving Method

This is often the simplest method and relies on the vehicle's sensors recalibrating automatically while driving. It requires no special tools, just patience and a bit of driving.

1. Inflate all tires to the recommended pressure as indicated on the tire placard located on the driver's side doorjamb. Use a reliable tire pressure gauge to ensure accuracy.
2. Start the engine. Ensure the vehicle is in "Park" (P) or "Neutral" (N).
3. Drive the vehicle. Drive at a speed above 25 mph (40 km/h) for at least 10 minutes. This allows the TPMS sensors to communicate with the vehicle's computer and recalibrate.
4. Monitor the TPMS warning light. While driving, observe the TPMS warning light on the dashboard. It should extinguish after the system has successfully recalibrated. This may take longer than 10 minutes in some cases.
5. Verify tire pressures. After the warning light has gone out, double-check the tire pressures to ensure they are still at the recommended levels. Minor adjustments may be necessary.

If the TPMS warning light does not extinguish after driving for a sufficient period, proceed to the next method.

Method 2: Using the Infiniti Vehicle Information Display

The Infiniti Vehicle Information Display provides access to various vehicle settings, including TPMS functions. This method allows for a more direct approach to resetting the system.

1. Inflate all tires to the recommended pressure.
2. Start the engine.
3. Navigate to the TPMS menu. Use the steering wheel controls to navigate the Vehicle Information Display menu. The exact location of the TPMS menu may vary slightly depending on the specific configuration, but it is often found under "Settings," "Vehicle Settings," or a similar category. Look for an option related to tire pressure or TPMS.
4. Select the "TPMS Reset" or "TPMS Calibration" option. Once you have located the TPMS menu, select the option to reset or calibrate the system. The wording may differ depending on the model year and trim level.
5. Follow the on-screen instructions. The system will provide on-screen prompts to guide you through the reset process. These prompts may involve confirming the reset or initiating a relearn procedure.
6. Drive the vehicle. After initiating the reset, drive the vehicle for a short distance (typically a few minutes) at a moderate speed to allow the sensors to recalibrate.
7. Monitor the TPMS warning light. Observe the TPMS warning light to ensure it extinguishes after the reset is complete.
8. Verify tire pressures. Double-check the tire pressures to ensure they are still at the recommended levels.

If the Vehicle Information Display does not offer a specific TPMS reset option, or if the warning light persists after attempting this method, proceed to the next method.

Method 3: Using a TPMS Reset Tool

A TPMS reset tool is a specialized device designed to communicate with the TPMS sensors and reset the system. These tools are commonly used by tire shops and automotive service centers, but they are also available for purchase by consumers.

1. Inflate all tires to the recommended pressure.
2. Obtain a TPMS reset tool. Ensure the tool is compatible with the 2017 Infiniti Q60.
3. Follow the tool's instructions. Each TPMS reset tool has its own specific operating procedure. Carefully read and follow the instructions provided with the tool.
4. Activate each TPMS sensor. The tool will typically guide you through a process of activating each TPMS sensor individually. This may involve holding the tool near the tire valve stem and pressing a button to transmit a signal to the sensor.
5. Follow the tool's prompts. The tool will provide prompts indicating when each sensor has been successfully activated.
6. Complete the reset procedure. Once all sensors have been activated, the tool will initiate the reset procedure, which involves programming the sensor IDs into the vehicle's computer.
7. Verify the reset. After the reset is complete, the tool may display a confirmation message. Start the engine and monitor the TPMS warning light to ensure it has extinguished.
8. Verify tire pressures. Double-check the tire pressures to ensure they are still at the recommended levels.

Using a TPMS reset tool offers a more reliable and efficient method for resetting the system, especially when dealing with multiple tire changes or sensor replacements.

Troubleshooting

If you encounter difficulties resetting the TPMS, consider the following troubleshooting tips:

• Ensure correct tire pressures. Verify that all tires are inflated to the recommended pressure before attempting the reset.
• Check for sensor damage. Inspect the TPMS sensors for any signs of physical damage. A damaged sensor may not be able to communicate with the system, preventing a successful reset.
• Verify sensor compatibility. If you have recently replaced any TPMS sensors, ensure that they are compatible with the 2017 Infiniti Q60.
• Check the battery. The TPMS sensors rely on batteries to transmit data. If the batteries are weak or depleted, the sensors may not function properly.
• Seek professional assistance. If you have tried all the methods above and are still unable to reset the TPMS, consult a qualified automotive technician.

Practical Advice and Insights

Regularly checking and maintaining proper tire pressure is essential for optimal vehicle performance, fuel efficiency, and safety. Make it a habit to check your tire pressures at least once a month, or more frequently if you notice any signs of low tire pressure.

When replacing tires, consider having the TPMS sensors inspected and replaced if necessary. The batteries in the sensors typically last for several years, but they will eventually need to be replaced. Replacing the sensors during a tire change can save you time and money in the long run.

Keep a record of your tire pressure readings. This can help you identify potential problems early on, such as a slow leak or a faulty TPMS sensor.

Understanding how to reset your TPMS can save you a trip to the mechanic and give you greater control over your vehicle's maintenance. By following the steps outlined in this article, you can ensure that your TPMS is functioning properly and providing accurate information about your tire pressures.